Windows of opportunity for catch up in nanofibers technology in Iran from a sectoral systems of innovation perspective
Emad
Ahmadvand
PhD student of technology management- Allameh Tabataba'i University, Tehran, Iran.
author
Seyed Reza
Salami
Faculty member of Allameh Tabataba'i University, Tehran, Iran.
author
Seyed Habiboallah
Tabatabaeian
Faculty member of Allameh Tabataba'i University, Tehran, Iran.
author
Jahanyar
Bamdad Soofi
Faculty member of Allameh Tabataba'i University, Tehran, Iran.
author
text
article
2018
per
Iran has experienced an evident progress on the path of catch up in nanofibers technology. This qualitative case study has analyzed the catch up process in this technology. The sectoral systems of innovation approach was used as the theoretical framework for the study. The effects of the technological regime, market regime, government policies and foreign sanctions on windows of opportunity in this sector has been explored. The study shows that: High technological opportunities, low appropriateness and low cumulativeness of nanofibers technology make this sector appropriate for a turbulent flow of innovators. Various and large local markets for nanofiber products can help domestic firms to build necessary capabilities for entering the foreign markets. However brand loyalty in one segment of the market and traditional players in another segment are two main market barriers for nanofibers development in Iran. Foreign sanctions against Iran on one hand have limited the financial transactions between Iranian and foreign firms. On the other hand, the sanctions have limited the entrance of foreign companies into Iran’s market. Government support programs for manufacturers of nanotechnology equipment had a crucial role in the success of the domestic firms in Entry Stage of the catch up cycle.
Innovation Management Journal
Iranian Association for Management of Technology
2322-5386
7
v.
3
no.
2018
1
28
https://www.nowavari.ir/article_87695_ba49c3cc8b7bb08e93dab0c3931a8b8b.pdf
Presenting a Framework of Organization Design in Technology-based International Strategic Alliances
S. Hossein
Jalali
Faculty of Management, University of Tehran
author
Tahmoores
Hasangholipour
Full Professor, Department of Business Management, Faculty of Management, University of Tehran
author
text
article
2018
per
Strategic alliances have gained considerable attention, both among strategic management researches and across managerial decisions in business companies. Despite of this popularity, the failure rate of strategic alliances is high and theoretical literature has being sought the reason in governance mechanism and organizational design of alliances. With considering the importance of this issue and theoretical gap about it, current research devoted to the requirements and specifications of the structure of technology-based international strategic alliances. Findings from this multiple case study research are distinguished three designs and theirs requirements for effective application: parliamentary, technocratic and committee. In high vertical centralization-low horizontal centralization situation, the parliamentary form has most effectiveness; and in low vertical centralization-high horizontal centralization, the technocratic form is best suited. These forms are on a spectrum in which, any points between extremes, is a favourable place for applying of committee-based structure.
Innovation Management Journal
Iranian Association for Management of Technology
2322-5386
7
v.
3
no.
2018
29
50
https://www.nowavari.ir/article_88267_86a8adcf36dbbcfbda321c7205b55f19.pdf
Identifying and prioritizing Critical Success Factors of product design in IT industry with Crowdsourcing Approach
Morteza
Soltani
University of tehran
author
maysam
shafiei
university of tehran
author
s.javid
hosseini
Faculty of Management and Accounting,university of tehran, College of Farabi
author
text
article
2018
per
Crowdsourcing is one of the new cooperative strategiesin open innovation that Using Information Technology (IT) facilities, provides a platform for active online crowds in various activities of companies such as product design. However, in this area, there were not too many projects which have achieved acceptable results. Therefore, this research attempts to identify and prioritize success factors of crowdsourcing in product design and improvement. the type of research is mixed method. The method of analysis for qualitative section is based on content analysis and for quantitative part is based on descriptive survey. Data were collected from experts and specialists in the field of crowdsourcing. Hence, several factors has been extracted from previous studies, then 36 main success factors has been recognized through interviewing approximately ten managers who are experienced in crowdsourcing for product design. The factors were assayed by Delphi method and final dimensions and factors were weighed by experts using best worth method. The study prioritized the quadruple dimensions of crowdsourcing as follows: contributors, IT system, organization management and employees. Among the factors of mentioned dimensions, “contributors operation quality”, “quality of IT System”, “control and supervision process” and “employees efficiency” are the most important ones, respectively.
Innovation Management Journal
Iranian Association for Management of Technology
2322-5386
7
v.
3
no.
2018
51
84
https://www.nowavari.ir/article_88595_262a63e44f8bf824357e25fa56580b70.pdf
Identifying and analyzing challenges of forming of the engineered collaboration network
(a Case study of collaboration network of Poyandeghan Rah Saadat)
Hashem
Moazzez
Assistant Professor at University of Tehran
author
Mohammad
Torabi Khargh
University of Tehran
author
Hadi
Nilforoushan
Assistant Professor at Shahid Beheshti University
author
Seyed Mohammad
Sahebkar Khorasani
Assistant Professor at Technology Studies Institute
author
text
article
2018
per
In recent years, many studies have been conducted on collaboration networks, however, the process of evolution and network creation has been considered in a small number of studies. In this context, comprehensive identification and analysis of the challenges in the network forming process are important in order to solve them and to stabilize the network. In this research, an active collaboration network in the field of medical equipment that engineered by a Hub in 2009 and consisting of a large company, a small and medium-sized company, two subcontractors, three universities, a start-up, an accelerator and a venture capital fund, was studied. The presence of diverse members in the network is the basis for the emergence of various challenges and allows for a comparative analysis between them. For process-centric and rich analyze of information that gathered from deep interviews and supporting documents, a qualitative approach and case study were used. Finally, after analyzing the structure and framework of the network, 4 collaboration models and 28 different challenges were identified in the network, and in order to provide an analysis, those 28 different challenges (based on their existence or absence in each of the 4 identified collaboration models) divided into 7 categories and analyzed
Innovation Management Journal
Iranian Association for Management of Technology
2322-5386
7
v.
3
no.
2018
85
112
https://www.nowavari.ir/article_88488_17767829de49cc38f84bf2ceea611ffd.pdf
A model for future-based knowledge management development; research study in the National Petrochemical Company
Ahmad
Borumand Kakhki
Institute of Vision and Futures Studies, Islamic Azad University, Ph.D. Candidate of Futures Studies, National Research Institute for Science Policy of Iran,Tehran, Iran.
author
Niloofar
Radnezhad
Master of Technology Foresight, Department of Management, Science and Technology, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran
author
Amir Naser
Akhavan
Faculty member, Department of Management, Science and Technology, Amirkabir University of Technology Tehran, Iran
author
MohammadJavad
Mostofi
Master of Technology Management, Department of Industrial Management, Faculty of Management & Accounting, Allameh Tabataba'i University, Tehran, Iran
author
text
article
2018
per
The pace of change, competition, informed customers and innovations makes to future challenges and uncertainties. So the efficiency of knowledge management (KM) and its adaptability to the future condition is necessary. If we don’t have a perspective on the organizational KM performance,not only the KM development activities will not be able to solve current problems, but also cannot benefit based on future knowledge needs. In this research, researchers by study on the National Petrochemical Company (NPC) have focused on how to integrate KM maturity to futures studies (FS), whose innovation relies on the combination and application of FS methods in this direction. Interviews, questionnaire and library studies were used for data collection. Using the logic of framework analysis, panels and focus groups on the future challenges of NPC KM result to break functional FS methods. Finally, a model for developing future-based KM has been proposed which consists of three stages: pathology and needs assessment, making knowledge base strategies and operational planning. The effect of this model is the value creation of knowledge strategies in accordance with the key state of the future (activity environment) and the convergence of macro strategies and the vision of organization with the objectives of knowledge management, which results in the evolution of the maturity level of KM from the perspective of the future.
Innovation Management Journal
Iranian Association for Management of Technology
2322-5386
7
v.
3
no.
2018
113
142
https://www.nowavari.ir/article_88489_ff53c11d900e1961aba77758906b7980.pdf
Identifying the policies for improving the knowledge absorption capacity and their effects on organizational performance : A System Dynamics Approach
saeed
jahanyan
Department of Management, Faculty of Administrative Sciences and Economics, Isfahan University, Isfahan, Iran
author
faeze
amini
Department of Management
author
ali
shaemi
Department of Management
author
text
article
2018
per
The purpose of this research is to investigate the policies which are most effective on the knowledge absorption capacity and then their effects on organizational performance. In this study we use Balanced Score Card(BSC) as our performance measurement structure. In order to be able to measure the effects of each policy and also their combinations, A system dynamics methodology is applied through which the main variables of the system and its boundaries are identifies. After testing all sections of the model and also the whole model through various validity tests, three separate policies including increased training hours, the competency of interviewers and increased proportion of retired employees been interviewed are performed by a simulation tool by which a stock & Flow model is made during the modeling process. According to the results the best policy for improving absorptive knowledge capacity and hence the organizational performance is a combination of all above mentioned policies. This study leads to a kind of decision support system through which managers in different levels would be able to simulate their potentially effective policies to see if they are actually effective on organizational performance or not. This study is a novel research which combines system dynamics with BSC in the field of knowledge absorption capacity in the organization.
Innovation Management Journal
Iranian Association for Management of Technology
2322-5386
7
v.
3
no.
2018
143
168
https://www.nowavari.ir/article_88596_15e1cc4847f929a0801ee2f4611c7a6e.pdf